Latest unloader scrap Tenders | Government unloader scrap Tenders

State Government

CTN :40514306

16 Jun, 2025 11.73 Crore

Ranchi - Jharkhand

Tender For design engineering supply of materials equipment erection testing and commissioning of 04 nos 220 kv bays at ttps switchyard along with dismantling loading and unloading transportation of existing damaged equipment from site store of tvnl on turnkey

State Government

CTN :40526456

12 Jun, 2025 NA

Karur - Tamil Nadu

Tender For loading of reels, bundles, copier boxes, note books, providing equipment operators for unloading of reel, shifting work at mayanur godown

CTN :40494646

16 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For sensors and measurement lab equipment - purchase of sensors & measurements laboratory, voltage, current and power measurement in single phase ac circuit digital power monitor- 10 asingle phase variac 0-240 v, 5 arheostat as load -500 , 5 avoltmeter 0-300 vammeter 0- 5 awattmeter analog 0-3000 welectrical panel & wiring , measurement of current in 3 phase circuit using single ammeter ammeter selector switch 440 v, 6 a 3 loading 5 a 3 phase variac 5 acurrent transformer 3 nos.ammeter 0-10 aelectrical panel, wiring & switches, measurement of resistance using wheatstone bridge necessary connecters provided to connect four arms range of measurement: 5 - 100k accuracy (min to max.): +0.2tolerance: +5%one digital meter provided to indicate the balance conditionsbuilt-in power supplynecessary patch chordsdecade resistance box, measurement of earth resistance by earth tester suitable connectors for 4 main arms and 2 adjacent armspotentiometer to keep the bridge in balance condition.inbuilt 1 khz oscillatormeasuring range : 25mh - 500mhsensitivity : +2mhbulit in audio amplifier with speakerbuilt-in power supplynecessary patch chords decade inductance box, measurement of inductance using anderson bridge suitable connectors for 4 main arms and 2 adjacent armspotentiometer provided to keep the bridge in balance condition.inbuilt 1 khz oscillatormeasuring range : 25mh - 500mhsensitivity : +2mhbulit in audio amplifier with speakerbuilt-in power supplynecessary patch chords decade inductance box, measurement of capacitance using schering bridge suitable connectors with 4 arms providedprovision to connect the unknown capacitance at one armtwo potentiometers provided to keep the bridge balance condition.inbuilt 1 khz oscillator and audio amplifier with speakermeasuring range: 0.001uf - 2.0ufsensitivity: +0.1uftolerance : +5%decade capacitance box , temperature measurement thermocouple trainer kit sensor type: thermocouplerange: upto 99 degree centigradetemperature source: water bath ( 1 kw)bridge: full bridge configurationsignal conditioning output: (0-5) vdcdisplay: 31/2 digital led display & analog thermometeroperating voltage: +12 vdc. -12 vdc, + 5 vdc, - 5 vdctest points: 2 mm sockets, temperature measurement rtd trainer kit sensor type: rtd (pt100)range: up to 99 degree centigradetemperature source: water bath ( 1 kw)bridge: full bridge configurationsignal conditioning : (0-5) vdcdisplay: 31/2 digital led display & analog thermometeroperating voltage: +12 vdc. -12 vdc, + 5 vdc, - 5 vdctest points: 2 mm sockets , behavior of proximity sensors proximity sensor of inductive provided to detect the metallic object. capacitive sensor provided to detect both metal and non-metal object.switching circuits provided to actuate the buzzer and relay.inbuilt regulated power supply.housed in a powder coated cabinet, linear variable differential transformer measurement trainer type: inductiverange: (0-25) mmexcitation: 4 khz, 1 v pp sine wavecalibrated range: (0-20) mm or + 10 mm/-10 mmsignal conditioner output: 0-5 vdc or +5/-5 vdcdisplay: 31/2 display digit ledmicrometer range: (0-25) mmtest points: 2 mm sockets, performance of ultrasonic and moisture sensors arduino uno board ultrasonic sensor to measure the distance.moisture sensor to measure the humiditylcd displayselector switch for display of sensor output.regulated power supplymount in a closed cabinet

CTN :40469638

16 Jun, 2025 497.43 Crore

Bhadradri Kothagudem - Telangana

Tender For drilling, excavation, loading, transportation, dumping, spreading and levelling, etc., of 1038.346 lbcm of in-situ ob (which includes 7.340 lbcm of top soil, 22.009 lbcm of sub soil, 976.866 lbcm of hard ob and 32.131 lbcm of coal), and excavation of 2.948 lbcm of in-situ ob for nallah diversion with conventional equipment, and additional works viz., 6000 shovel hours, 5000 dozer hours and 3,83,000 rmt of drilling at kk ocp, mandamarri area during a period of 48 months.

CTN :40483415

04 Jun, 2025 17.66 Lacs

Merta - Rajasthan

Tender For transportation, loading and un-loading of various material (steel structure/equipment/cable drum/earthing material etc) from various stores to 1. 132 kv gss kharnal tejaji. 2. 132 kv gss sankhwas.

Central Government/Public Sector

CTN :40418880

11 Jun, 2025 NA

Durgapur - West Bengal

Tender For design, engineering, manufacture, fabrication / assembly, inspection, shop testing, painting at manufacturer shop, packing, loading and transportation, supply for site, supervision of erection, trial run, and commissioning of electric hoists along with their electrical equipment and standard accessories with attachments as per technical parameters, for up_gradation of blast furnace no. 3 at sail, durgapur steel plant.

State Government

CTN :40435240

29 May, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

Central Government/Public Sector

CTN :40440014

02 Jun, 2025 NA

Hyderabad-T - Telangana

Tender For custom bid for services - shifting of machinery within the premises at bdl kbu-1) dismantling of below mentioned machines and their accessories from existing positions at gms building and shifted to specified areas within bdlkbu premises i.e. cp2 workshop and igmp cnc workshop. gms of cp2 to igmp cnc workshop: a) hmt radial drilling machine b) hmt surface grinding machine c) hmt cylinderical grinding machine d) hmt tool & cutter grinding machine gms of cp2 to cp2 cnc workshop(within bdl-kbu premises): e) hmt nh 25 lathe machine f) hmt nh 22 lathe machine g) batlibai vmc bfv-5 machine -i h) batlibai vmc bfv-5 machine ii 2) the loading, unloading, shifting & positioning has to be done in a safe manner without damaging the machines and other equipment s of bdl. 3) bdl will intimate to vendor about date of work in advance to start carrying out the work. 4) dismantling, installation of the machines is under party s scope. 5) foundation has to be done if required for above mentioned machines which shall be under party s scope only.

State Government

CTN :40376302

20 May, 2025 20.00 Lacs

Latur - Maharashtra

Tender For work of loading ,unloading to & fro transportation of equipment s, scraped material from various location of outside latur division to latur division store or to anywhere in latur division area.

Central Government/Public Sector

CTN :39931600

20 May, 2025 NA

Durgapur - West Bengal

Tender For corrigendum : design, engineering, submission of drawings for approval, manufacture, testing, inspection by mecon/dsp/cet, packing, loading, delivery at plant site/ storage area, supervision of erection, supervision of testing & supervision of commissioning of electrical equipment as mentioned under bill of quantities (table-3) and design, engineering, submission of drawings for approval, manufacture, testing, inspection by mecon/dsp/cet, packing, loading, delivery at plant site, storage, watch & ward, loading for transportation to erection site, unloading at erection site, dismantling, erection, testing & commissioning of retrofitting & extension works as mentioned under bill of quantities (table-1 & 2) , required for upgradation of blast furnace no. 3 at sail, durgapur steel plant.

Unloader Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector